User Manual User guide

507 SPED sequence error
Verify all SPED connections. Restart the operating system. Clear
any errors conditi
ons. Inspect the battery for a voltage reading of
greater than 2.8 VDC. Replace SPED battery is below 2.8 VDC.
Replace SPED module if error persists.
508 SPED LRC error
Verify all SPED connections. Restart the operating system. Clear
any errors conditi
ons. Inspect the battery for a voltage reading of
greater than 2.8 VDC. Replace SPED battery is below 2.8 VDC.
Replace SPED module if error persists.
509 SPED no data
Verify all SPED connections. Restart the operating system. Clear
any errors conditi
ons. Inspect the battery for a voltage reading of
greater than 2.8 VDC. Replace SPED battery is below 2.8 VDC.
Replace SPED module if error persists.
510 SPED invalid message ID
Verify all SPED connections. Restart the operating system. Clear
any errors conditi
ons. Inspect the battery for a voltage reading of
greater than 2.8 VDC. Replace SPED battery is below 2.8 VDC.
Replace SPED module if error persists.
511 SPED Data overflow
Verify all SPED connections. Restart the operating system. Clear
any errors conditi
ons. Inspect the battery for a voltage reading of
greater than 2.8 VDC. Replace SPED battery is below 2.8 VDC.
Replace SPED module if error persists.
512 SPED device idle
Verify all SPED connections. Restart the operating system. Clear
any errors conditi
ons. Inspect the battery for a voltage reading of
greater than 2.8 VDC. Replace SPED battery is below 2.8 VDC.
Replace SPED module if error persists.
513 SPED device offline
Verify all SPED connections. Restart the operating system. Clear
any errors conditi
ons. Inspect the battery for a voltage reading of
greater than 2.8 VDC. Replace SPED battery is below 2.8 VDC.
Replace SPED module if error persists.
514 SPED device bit stuck
Verify all SPED connections. Restart the operating system. Clear
any errors conditi
ons. Inspect the battery for a voltage reading of
greater than 2.8 VDC. Replace SPED battery is below 2.8 VDC.
Replace SPED module if error persists.
515 SPED device attention stuck
Verify all SPED connections. Restart the operating system. Clear
any errors conditi
ons. Inspect the battery for a voltage reading of
greater than 2.8 VDC. Replace SPED battery is below 2.8 VDC.
Replace SPED module if error persists.
516 SPED device no attention
Verify all SPED connections. Restart the operating system. Clear
any errors conditi
ons. Inspect the battery for a voltage reading of
greater than 2.8 VDC. Replace SPED battery is below 2.8 VDC.
Replace SPED module if error persists.
517
SPED device timeout
Verify all SPED connections. Restart the operating system. Clear
any errors conditions. Inspect the battery for a voltage reading of
greater than 2.8 VDC. Replace SPED battery is below 2.8 VDC.
Replace SPED module if error persists.
518 SPED command sequence error
Verify all SPED connections. Restart the operating system. Clear
any errors conditi
ons. Inspect the battery for a voltage reading of
greater than 2.8 VDC. Replace SPED battery is below 2.8 VDC.
Replace SPED module if error persists.
519 SPED invalid command data
Verify all SPED connections. Restart the operating system. Clear
any errors conditi
ons. Inspect the battery for a voltage reading of
greater than 2.8 VDC. Replace SPED battery is below 2.8 VDC.
Replace SPED module if error persists.
520 SPED device reset
Verify all SPED connections. Restart the operating system. Clear
any errors conditi
ons. Inspect the battery for a voltage reading of
greater than 2.8 VDC. Replace SPED battery is below 2.8 VDC.
Replace SPED module if error persists.
521 SPED clear key
Verify all SPED connections. Restart the operating system. Clear
any errors conditi
ons. Inspect the battery for a voltage reading of
greater than 2.8 VDC. Replace SPED battery is below 2.8 VDC.
Replace SPED module if error persists.
31