User Manual

7
Chapter 3. Set up TCL Mesh
This chapter introduces the basic instructions on how to set up and manage your mesh network
and how to make connections.
3.1 Set up the primary node
The first mesh point you set up serves as the primary node, and the rest mesh points as the
secondary nodes.
Note
: Set up the node on a hard, stable work surface that allows for adequate air circulation
around the node.
To set up the primary node, follow these steps:
1. Plug in the primary node using the included power adapter.
2. Connect the WAN port of the primary node to an internet source using the included
Ethernet cable. When the setup is complete, the LED indicator blinks green fast, then turns
solid green.
:$1
32:(5
3.2 Connect the primary node to TCL Mesh
To connect the primary node to the TCL Mesh network, follow these steps:
1. Plug in the primary node using the included power adapter.
2. Connect the WAN port of the primary node to an internet source using the included
Ethernet cable.
3. From your mobile device's WLAN or Wi-Fi settings, select the Wi-Fi network of the
primary node and make an internet connection. Find the default Wi-Fi name and password
on the bottom label of the node.
4. Open the
TCL WiFi
app on your mobile device.