User Manual

11
Note
: Tap the icon at the upper-right corner to share the Wi-Fi name and password.
Guest Network
This function is disabled by default. Once you enable it, your guests can reach the internet
without accessing your primary TCL Mesh network.
Parental Control
In this function, you can manage which client devices can access the internet, and also set a
internet access schedule for the client devices.
Internet Settings
You can set the connection mode to
PPPoE, DHCP, Static IP Address,
or
Bridge
.
PPPoE
Point-to-Point Protocol over Ethernet (PPPoE) is a network protocol
that is mainly used for DSL services whereby individual users connect
to a modem using an Ethernet connection.
Enter the username and password provided by your internet service
provider (ISP), and click
Save
.
DHCP
Dynamic Host Configuration Protocol (DHCP) is a client or server
protocol that automatically provides you with an Internet Protocol (IP)
host. The IP address and related configuration settings such as subnet
mask and default gateway are all automatically assigned.
Static IP Address
Access the internet using a fixed IP address, subnet mask, gateway
IP address and Primary DNS server. These information should be
provided by your ISP.
Bridge
Before selecting this mode, you need to connect your primary node to
the LAN port of an internet-connected router.
Note
: If the
Bridge
mode is selected, the Guest Network, Parental
Control, Port Forwarding, UPnP, DNS, QoS and DHCP Server functions
will not be available.
IPv6
Enable or disable the IPv6 function in this option.
QoS
Quality of Service (QoS) is an advanced feature that prioritizes internet traffic for applications,
online gaming, or specified MAC addresses to minimize the impact of busy bandwidth.
To access this function, navigate to
QoS
and enable this function, then set upload and
download speed limits, and click
Save
.
Add Mesh Point
If you want to expand your existing TCL Mesh network range, you can purchase an additional
mesh node. For how to add a new node to the TCL Mesh network, navigate to
Add Mesh Point
,