MS1G User Manual
Contents Read this first ...................................................................................................................................................3 Chapter 1. Overview......................................................................................................................................4 1.1 Top view..................................................................................................................................................................4 1.
Read this first • Before using this documentation and the device it supports, ensure you read and understand the "Appendix A. Important safety information" on page 14. • Illustrations in this documentation might look different from your device. • Instructions in this documentation may vary depending on your device model and software version. • Some apps and features are not available in all countries or regions. App and feature availability is subject to change.
Chapter 1. Overview TCL Mesh is a whole home Wi-Fi mesh system. It creates a seamless and reliable Wi-Fi coverage throughout your home, making sure your devices stay on the optimal Wi-Fi channel. 1.1 Top view 1 • Solid green: excellent signal strength. • Solid yellow: good signal strength. 1. LED indicator • Solid red: weak signal strength. • Blinking green slowly: scanning for available network. • Blinking green fast: connecting to the network.
1.2 Bottom view 1 2 RESET WPS / POWER WAN 3 4 LAN 1. LAN port Used to connect to wired devices such as computers or switches. 2. WAN port Used to connect to an internet source. 3. WPS/Reset button • Press to enable the WPS function. The WPS function will be automatically disabled if a WPS connection is not established within 2 minutes. • Press for 8 seconds to reset the device, and the LED indicator will blink green fast. 4. Power connector Used to connect to the power adapter.
Chapter 2. Download the TCL WiFi app Use the TCL WiFi app to set up and manage your mesh network. Scan the QR code below to install the TCL WiFi app on your mobile device. Note: The QR code is also printed on the bottom label of your mesh point. Alternatively, you can install the TCL WiFi app from either the Google Play (Android) or the App Store (iOS).
Chapter 3. Set up TCL Mesh This chapter introduces the basic instructions on how to set up and manage your mesh network and how to make connections. 3.1 Set up the primary node The first mesh point you set up serves as the primary node, and the rest mesh points as the secondary nodes. Note: Set up the node on a hard, stable work surface that allows for adequate air circulation around the node. To set up the primary node, follow these steps: 1. Plug in the primary node using the included power adapter. 2.
5. Tap Setup > Next. You will be prompted to change the Wi-Fi name and password. 6. Connect your mobile device to the Wi-Fi network you just created. 7. Open the TCL WiFi app, and you will find the primary node is connected to your TCL Mesh. 3.3 Connect the secondary nodes to TCL Mesh The mesh nodes in the same kit have already been paired with each other. In this case, follow these steps: 1. Place the secondary node in an open space no more than two rooms away from the existing nodes. 2.
You can access the TCL Mesh network wiredly or wirelessly. • For wired access, connect your wired client device to the LAN port of the nodes. • For wireless access, select the Wi-Fi name of the TCL Mesh network on your wireless client devices, and enter the Wi-Fi password you created.
Chapter 4. Explore more with the TCL WiFi app This chapter introduces how to configure your TCL Mesh network via the TCL WiFi app. Use the TCL WiFi app on your mobile device to quickly check download and upload speed, change Wi-Fi name and password, configure guest network, and more. 4.1 My WiFi The My WiFi section gives you a general view of the TCL Mesh network, including the Wi-Fi name, the number of mesh nodes, the number of connected devices, and the download and upload speed, etc.
Note: Tap the icon at the upper-right corner to share the Wi-Fi name and password. Guest Network This function is disabled by default. Once you enable it, your guests can reach the internet without accessing your primary TCL Mesh network. Parental Control In this function, you can manage which client devices can access the internet, and also set a internet access schedule for the client devices. Internet Settings You can set the connection mode to PPPoE, DHCP, Static IP Address, or Bridge.
then follow the on-screen instructions. Fast Roaming With this function enabled, you can enjoy an uninterrupted internet experience when moving around your home. Capacity-oriented Mode Enable this function when more than 30 client devices connect to the TCL Mesh network at the same time. Smart Assistant With this function enabled, the current mobile device will connect to the 2.4 GHz Wi-Fi network for 30 minutes. You can then discover and configure smart devices that only support 2.
exchanging data with client devices at a speed of over 3 KB/s. About App Version The app version is displayed in this option. You can tap the option to see whether the current version is the latest one.
Appendix A. Important safety information Read all the safety information before using your product. Failure to follow these safety instructions could result in injury, or damage to your product or other property. Important safety instructions • Observe signs and notices that prohibit or restrict the use of wireless devices. • Always handle your device with care. It contains sensitive electronic components inside.
Appendix B. Regulatory compliance information This section introduces regulatory information, certification, and compliance information specific to your product. Eelectromagnetic fields (EMF) This product complies with all applicable standards and regulations regarding exposure to electromagnetic fields. FCC compliance statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Disposal and recycling information At TCL, we continually strive to improve our operations and products, and minimize our impact on the environment. Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment. For recycling information, please visit www.tcl.com.
Appendix C. Troubleshooting If you encounter problems while using the product, use the troubleshooting information to help determine the problem and find possible solutions. Problem Solution How to add a new mesh node to the TCL Mesh network? 1. P lace the new node in an open space no more than two rooms away from the existing nodes. 2. Plug in the new node using the included power adapter. 3. Open the TCL WiFi app on your mobile device. 4.
First Edition TCL and the TCL logo are trademarks of TCL Communication Ltd. All other trademarks and trade names are the property of their respective owners. © 2021 TCL Communication Ltd. All rights reserved.
