User Manual

8
5. Tap
Setup > Next
. You will be prompted to change the Wi-Fi name and password.
6. Connect your mobile device to the Wi-Fi network you just created.
7. Open the
TCL WiFi
app, and you will find the primary node is connected to your TCL
Mesh.
3.3 Connect the secondary nodes to TCL Mesh
The mesh nodes in the same kit have already been paired with each other. In this case, follow
these steps:
1. Place the secondary node in an open space no more than two rooms away from the
existing nodes.
2. Plug in the secondary node using the included power adapter.
3. The secondary node will automatically connect to the existing mesh network. Once the
connection is complete, the LED indicator of the secondary node flashes solid green.
Note
: If the connection is not optimal, the LED indicator flashes either solid yellow or solid
red. You can place your node closer to the existing nodes and try again.
If you want to connect a new mesh node to your existing TCL Mesh network, follow these
steps:
1. Place the new node in an open space no more than two rooms away from the existing
nodes.
2. Plug in the new node using the included power adapter.
3. Open the
TCL WiFi
app on your mobile device.
4. Tap
Settings > Add Mesh Point
, then follow the on-screen instructions to complete the
procedure.
Note
: Find the QR code or the SN on the bottom label of the node.
5. Once the connection is complete, the LED indicator of the new node flashes solid green.
Note
: If the connection is not optimal, the LED indicator flashes either solid yellow or solid
red. You can place your node closer to the existing nodes and try again.