Manual

Speaker placement

To achieve the best possible surround sound, install your speakers as shown below Be sure all speakers are installed

securely to prevent accidents and improve sound quality

Sub Woofer

F,'° ttCeote,/

Position

• Install the left and right front speakers at equal dtstances from the TV

• When mstalhng speakers near the TV, we recommend using magnet=cally shielded speakers to prevent

possible interference such as distortion in the color of the TV screen If you do not have magnetically

shielded speakers and notice discoloration of the TV screen, place the speakers farther away from the TV.

• Install the center speaker above, below the TV so that the sound of the center channel is localized at the TV

screen.

CAUTION

When mstalhng the center speaker on top of the TV, be sure to secure it with tape or some other suitable

means.

Otherwise, the speaker may fall from the TV due to external shocks such as earthquakes, and it may lead to

endangering those nearby or damaging the speaker

• If possible, install the surround speakers slightly above ear level

• It may be difficult to obtain a cohesive surround effect if the surround speakers are installed farther away

from the listening pos=tlon than the front and center speakers.

Power connection

[SWITCHED 100 W (0.8 A) MAX] (Multi-Voltage model: 100 W MAX)

Switching this receiver on or putting it in standby also switches components connected to the receiver's AC OUTLET

Jackson and off. When connecting components to the AC OUTLET lacks, leave the power switch of the connected

components in the ON position. Total power consumption of connected components should not exceed 1O0W (O 8 A)

(Mult=-Voltage model' 100 W MAX)

CAUTION !

• To avoid malfunction, overheating, and possible fire risk, do not connect high-wattage appliances such as blow

dryers and irons to the AC OUTLET Jacks.

• Do not connect a momtor orTV set.

Even if the power consumption of the TV or monitor iswithin the acceptable limits, when monitors or TV sets are

switched on, a large amount of power is needed which may exceed the capac=ty of this rece

_RB7157>