Manual

[ Digital Connections ]

Digital components can be connected as shown below. You can select up to four (three on the VSX-D508) of the

following be assigned to the digital inputs on this unit: DVD/LD, TV/SAT, MD/TAPE, CD, VCR1 (VCR). To assign the

digital inputs, refer to "Setting Up for Surround Sound" on page 16)

The digital signal input is output directly to digital recording components from the optical digital output jack. (VSX-D608

only)

VSX-D60R

t t

CD player [ DVD player TV tuner

(or satellite tuner)

When playing LD recorded in Dolby Digital

When connecting a DVD/LD player or LD player using

the AC-3 RF output, a commercially available RF

demodulator (RFD-1) is required. The RF demodulator

changes the RF signal to a digital signal which is then

processed by the receiver at the digital input jacks. For

more details, refer to the instruction manual supplied

with the RFD-1.

The factory setting for each of the digital inputs is

described below•

COAX : DVD

OPT 1 : CD

OPT 2 : MD

OPT 3 : TV (VSX-D608 only)

1 t t

MD recorder Ij

(VSX-D608 only)

• Digital audio cords/Fiber-optic cable

Commercially available digital audio coaxial cord

(standard video cords can also be used) or fiber-optic

cables (not supplied) are used to connect digital

components to this receiver.

When you use optical digital input or output terminals,

pull off the caps and insert the plugs• Be sure to insert

completely.

Digital audio cords

(or standard video cords}

Fiber-optic cable