CLI Guide

Write Privilege None
License Required iDRAC Express or iDRAC Enterprise
Dependency Not Applicable
NIC.IscsiSecondTgtParams.SecondTgtChapId (Read or Write)
Description
Second Target CHAP ID (up to 128 characters in length). If only a single value of CHAP ID supported for
all targets then it is stored here
Legal Values None
Default Value None
Write Privilege None
License Required iDRAC Express or iDRAC Enterprise
Dependency Not Applicable
NIC.IscsiSecondTgtParams.SecondTgtChapPwd (Read or Write)
Description
Second Target CHAP Secret (0 or 12 to 16 characters in length). If only a single value of CHAP Secret is
supported then it is stored here
Legal Values None
Default Value None
Write Privilege None
License Required iDRAC Express or iDRAC Enterprise
Dependency Not Applicable
NIC.IscsiSecondTgtParams.SecondTgtIpAddress (Read or Write)
Description
Second iSCSI target IP address. Will be either IPv4 or IPv6 format depending on the value of the
SecondTgtIpVer attribute
Legal Values None
Default Value None
Write Privilege None
License Required iDRAC Express or iDRAC Enterprise
Dependency Not Applicable
NIC.IscsiSecondTgtParams.SecondTgtIpVer (Read or Write)
Description
Setting displays and allows configuration of IP version used for second iSCSI target when
iSCSIDualIPVersionSupport is available
Legal Values
● IPv4
● IPv6
Default Value IPv4
Write Privilege None
License Required iDRAC Express or iDRAC Enterprise
920 NIC Attributes