CLI Guide

NIC.DCBSettings.LocalDCBXWillingMode (Read or Write)
Description
Indicates whether or not the controller will accept DCB configuration parameters from the link partner as
defined in DCBX. Note: Only controllers that allow the disablement of Willing Mode should implement this
and the associated Priority Group protocol and bandwidth attributes.
Legal Values
● Enabled
● Disabled
Default Value Enabled
Write Privilege None
License Required iDRAC Express or iDRAC Enterprise
Dependency Not Applicable
NIC.DCBSettings.PriorityFlowControl (Read Only)
Description
Indicates whether the Priority Flow Control capability is supported.
Legal Values
● Available
● Unavailable
Default Value None
Write Privilege None
License Required iDRAC Express or iDRAC Enterprise
Dependency Not Applicable
NIC.DCBSettings.PriorityGroup0BandwidthAllocation (Read or
Write)
Description
Indicates the percentage of total port bandwidth is assigned to Priority Group 0. The summation of
bandwidth allocations from all Priority Groups must equal 100%. Note: NO X-UEFI Mapping
Legal Values None
Default Value None
Write Privilege None
License Required iDRAC Express or iDRAC Enterprise
Dependency Not Applicable
NIC.DCBSettings.PriorityGroup0ProtocolAssignment (Read or
Write)
Description
Indicates what protocol is assigned to Priority Group 0.
Legal Values
● All other LAN
● iSCSI
● FCoE
● RoCE
● None
Default Value None
886 NIC Attributes