CLI Guide

NIC.IscsiFirstTgtParams
The following section provides information about the objects in the NIC.IscsiFirstTgtParams group.
NIC.IscsiFirstTgtParams.ConnectFirstTgt (Read or Write)
Description
Setting to enable whether connection to the first target is attempted.
Legal Values
● Enabled
● Disabled
Default Value Disabled
Write Privilege None
License Required iDRAC Express or iDRAC Enterprise
Dependency Not Applicable
NIC.IscsiFirstTgtParams.FirstTgtBootLun (Read or Write)
Description
Specifies the first iSCSI target boot LUN.
Legal Values None
Default Value None
Write Privilege None
License Required iDRAC Express or iDRAC Enterprise
Dependency Not Applicable
NIC.IscsiFirstTgtParams.FirstTgtChapId (Read or Write)
Description
First Target CHAP ID (up to 128 characters in length). If only a single value of CHAP ID supported then it
is stored here.
Legal Values None
Default Value None
Write Privilege None
License Required iDRAC Express or iDRAC Enterprise
Dependency Not Applicable
NIC.IscsiFirstTgtParams.FirstTgtChapPwd (Read or Write)
Description
First Target CHAP Secret ( 0 or 12 to 16 characters in length). If only a single value of CHAP Secret is
supported then it is stored here.
Legal Values None
Default Value None
Write Privilege None
License Required iDRAC Express or iDRAC Enterprise
Dependency Not Applicable
NIC Attributes 909