Manual
Table Of Contents
- Important Safety Instructions
- Legal Disclaimer
- Limited warranty
- 1. Introduction
- 2. Plug-in Installation
- 3. Activate your TC8210 iLok license
- 4. Connection and Setup
- 4.1 Connecting the TC8210-DT Desktop Controller (when you have purchased the DT Desktop Controller version)
- 4.2 Operating the TC8210
- 4.3 Insert vs Aux Effect
- 4.4 Mono/Stereo Operation
- 4.5 Travel Period and Module Connection (when you have purchased the DT version):
- 4.6 Primary and Secondary Controls
- 4.7 Connection Status to the Hardware Unit
- 5. Plug-in and Hardware Controls
- 6. Presets
- 7. Software Updates
- 8. Specifications
16 TC8210 User Manual
7. Software Updates
New versions of the software may be released to add new features and improve
performance. Updates can be detected from the plug-in directly and can be
installed after download from the website. See Chapter 2 for plug-in installation.
If the ’Automatically check for updates’ option is checked inside the update
menu, the red dot will appear on the settings icon when a new plug-in
is available.
Click the gear icon and select “Check for Updates” to perform a scan.
7.1 Hardware Unit Software Updates (optional)
The hardware unit's rmware will be included in each plug-in update.
After you have installed a new plug-in, the system will detect mismatched
rmware and indicate a need for update via a small red dot on the gear icon.
Click the “Upgrade to x.x.xx” eld to start the update. Progress will be indicated
in the plug-in.
8. Specications
Sound
Sample rates 44.1, 48, 88.2, 96, 176.4, 192 kHz
Software Support
Operating systems Mac OS X 10.10 Yosemite or above,
Windows 7 or above
Drivers No additional drivers required,
uses standard USB HID drivers
Plugin formats AAX-native, Audio Units, VST2.4,
VST3. 32/64 bit
USB Connection (DT version)
Type USB 2.0, type micro-B
Power (DT version)
Power supply USB bus powered
Power consumption Max. 2.5 W
Physical (DT version)
Dimensions (HxWxD) 42 x 54 x 135 mm (1.7 x 2.1 x 5.3")
Weight 0.22 kg (0.48 lbs)