Manual
Table Of Contents
- Important Safety Instructions
- Legal Disclaimer
- Limited warranty
- 1. Introduction
- 2. Plug-in Installation
- 3. Activate your TC8210 iLok license
- 4. Connection and Setup
- 4.1 Connecting the TC8210-DT Desktop Controller (when you have purchased the DT Desktop Controller version)
- 4.2 Operating the TC8210
- 4.3 Insert vs Aux Effect
- 4.4 Mono/Stereo Operation
- 4.5 Travel Period and Module Connection (when you have purchased the DT version):
- 4.6 Primary and Secondary Controls
- 4.7 Connection Status to the Hardware Unit
- 5. Plug-in and Hardware Controls
- 6. Presets
- 7. Software Updates
- 8. Specifications
7 TC8210 User Manual
4.3 Insert vs Aux Eect
The TC8210 can be inserted directly into an eect slot on a single channel, as described above, which passes the entire signal through the eect.
However, the TC8210 can also be added to an auxiliary bus, and one or more channels can send a portion of their signal to this bus to be processed by the eect.
In this case, Mix should be set to 100%.
The output of the eect is then mixed back in with the rest of the tracks. This diers from an insert eect in that the TC8210 isn’t aecting the track’s entire signal.
4.4 Mono/Stereo Operation
The TC8210 can be used both as a mono instance on mono tracks and a stereo instance on stereo tracks. Depending on the specic DAW, a mono in/stereo out may also
be available.
In the case of a mono out instance, the output signal is made by outputting the left plug-in channel only.
The TC8210 is fully mono-downmix compatible, due to its decorrelated output signals. This way it ensures playback compatibility on mono systems such as DAB radios,
mobile devices and audio installations in shops and restaurants.
4.5 Travel Period and Module Connection (when you have purchased the DT version):
You can try out the plug-in before purchasing or receiving your purchased Desktop Controller by requesting a Free iLok Trial License, which will enable full
functionality for 14 days.
When you receive and connect your purchased Desktop Controller you will no longer need an iLok License to have full functionality in the plug-in or via the
Desktop Controller.
60 days Travel Period
If the Desktop Controller is disconnected, full plug-in functionality will be available for 60 days, after which the plug-in requests re-connection to the hardware unit.
Once the hardware unit is re-connected, all controls become available.
Download and install the
plug-in and connect
the module
Disconnect Module 60 days... Reconnect Module
Full Fuctionality
Processing, controls
available for 60 days
countdown
Processing Only Full Fuctionality Restored
60 day count downLink to product page
with store nder