Manual

9 TC8210 User Manual
5. Plug-in and Hardware Controls
Control of the TC8210 is done in the plug-in, or optionally done using the
hardware unit (when you have purchased the DT version). All primary parameters
of the 8210 are also accessible through the DT Desktop Controller. These include
parameters that control major parts of the eect, such as reverb decay,
delay time, and much more. Secondary parameters that are needed less-often
are handled in the plug-in window.
5.1 Primary Plug-in and Hardware Controls
Meters
The LED meter section at the top of the hardware module gives feedback about
the incoming and outgoing audio signals. The input level displays the audio as it
enters the plug-in, and the level is not aected by adjustments to the input level
control or any other parameter. The output meter is aected by the results of the
eect, as well as the output level control parameter.
Take care to keep the signal levels below the maximum, to prevent distortion.
Sound Section
The numerical display shows the current value of the LO COL, COLOR, and MOD
settings from 1 to 20.
The current reverb type is indicated by the red led next to the display text.
Reverb Type
The dierent Reverb Types are all classic TC Electronic high-end algorithms.
They each address specic uses, and combined they cover a great palette.
Pressing the SELECT button scrolls through these classic reverb selections:
• • TC Hall
• • Box
• • Ambient
• • Room
• • Club
• • Live
• • Plate
• • Spring
You will also see the type change automatically when various presets
are selected.