Technical data

Fig.7-14: Connecting the UPS to the XUSB2 USB connection
The driver is installed after the first connection of the UPS via the
USB cable. A virtual COMn (e.g. COM3) interface is created in the
operating system.
There is a defined assignment of the UPS to the USB interface for
firmware version 01VRS.
For further information about UPS cabling please refer to chapter 5.4 "Wir‐
ing" on page 29.
Project Planning Manual | Rexroth IndraControl VSB 40.3 Electric Drives
and Controls
| Bosch Rexroth AG 45/101
PC Box