Technical data

Fig.7-8: Ethernet interface XLAN
The driver configuration of the network connection can be called up in the task
bar or in the "Control Panel" with the "Network board" icon. It can be set whether
the data transmission should be carried out with 10 Mbits/s, 100 Mbits/s or
1000 MBit/s via the network.
Observe that the network board of the remote station has to be able
to process the same data transmission rate.
7.2.8 XVGA Interface
XVGA – Connection external mon‐
itor
An external monitor can be connected to the VGA connection (XVGA). The
monitor can be operated via the integrated video adapter as or parallel to a VDP
that is connected via the CDI display interface.
HD female connector, 15-pin
Cable length 1.5 m max.
Cable type
Shielded, cross-section min. 0.14 mm
2
Max. resolution 2048 × 1536 pixels, 75 Hz, max. 4294 mio.
colors
Project Planning Manual | Rexroth IndraControl VSB 40.3 Electric Drives
and Controls
| Bosch Rexroth AG 41/101
PC Box