Technical data

Fig.5-4: Mounting specifications for vertical mounting with connector panel in
forward direction
5.3 Installation Notes
● Avoid installation locations exposed to direct UV/sunlight, because this
causes additional heat development.
● When determining installation location and mounting position, observe
that the optionally available drive can be opened unobstructed.
● Install the VSB in a way ensuring easy access to the connector panel.
● Provide a sufficient space of 50 mm (on all sides of the device) for sufficient
cooling and cable routing.
● Lay all connecting cables in loops and use strain reliefs for all cables.
● Keep as much distance as possible to noise sources.
● Fasten the VSB 40.3 with four M5 screws at the integrated mounting
brackets.
Maintenance distances
For maintenance the following distances must be kept:
● 240 mm for opening the housing cover.
● 150 mm for the DVD drive.
See the following figure:
28/101 Bosch Rexroth AG | Electric Drives
and Controls
Rexroth IndraControl VSB 40.3 | Project Planning Manual
Dimensions, Installation and Wiring