Technical data

Fig.5-2: Front view of the VSB 40.3: horizontal
Do observe the space required for all installation positions of connectors and
cables as well as for the opening drive. A space of at least 50 mm is required
on all sides in order to guarantee a sufficient cooling of the VSB 40.3.
Observe additional space for maintenance, if required. Example: see fig. 8-3
"Position of the hard disk and of the fastening screws (inside)" on page 50.
Observe also chapter 5.3 "Installation Notes" on page 28.
26/101 Bosch Rexroth AG | Electric Drives
and Controls
Rexroth IndraControl VSB 40.3 | Project Planning Manual
Dimensions, Installation and Wiring