Technical data

4.4 Standards
4.4.1 Used Standards
The system components of the control cabinet PCs correspond to the following
standards:
EN Standards
Standard Meaning
EN 60,204-1 Electrical equipment of machines
EN 50,081-2 Generic standard, emitted interference (industrial envi‐
ronment)
EN 50,082-2 Generic standard, noise immunity (industrial environ‐
ment)
EN 60,742 Transformer for 24 V power supply unit, protective sepa‐
ration
EN 60,950 Overvoltage category II
EN 61,131 Requirements regarding the 24 V outputs
EN 61 131-2 Requirements on the 24 V power supply
EN 418 Machine safety, EMERGENCY STOP devices
EN 60 529 Degrees of protection (including housings and installation
compartments)
EN 60,068-2-6 Vibration test
EN 60,068-2-27 Shock test
EN 60 721-3-1 and -3 Climatic class
Fig.4-4: Used standards
4.4.2 CE Marking
Declaration of Conformity
The electronic products described in the project planning manual comply with
the requirements and goals of the following EC guideline and with the agreed
European standards:
EMC guideline 2004/108/EC
The electronic products described in the project planning manual comply with
the requirements on the operation within the industrial environment:
Standard Title Edition
DIN EN
61000-6-4
(VDE 0839-6-4)
Electromagnetic compatibility (EMC)
Volume: 6-4: Generic standards - Immunity for in‐
dustrial environments (IEC 61000-6-4:2006)
September
2007
DIN EN
61000-6-2
(VDE 0839-6-2)
Electromagnetic compatibility (EMC)
Volume: 6-2: Generic standards - emitted interfer‐
ence for industrial environments (IEC
61000-6-2:2005)
March 2006
Fig.4-5: Electromagnetic compatibility (EMC) standards
Project Planning Manual | Rexroth IndraControl VSB 40.3 Electric Drives
and Controls
| Bosch Rexroth AG 21/101
Technical Data