Technical data

5 Dimensions, Installation and Wiring
5.1 General Information
All values in the illustrations are given in mm.
For a safe mounting of the VSB 40.3 – e. g. in a control cabinet – 2x four fas‐
tening holes are provided so that the VSB 40.3 can be horizontally or vertically
mounted.
Bosch Rexroth recommends the mounting directions illustrated below.
Fig.5-1: Front view of the VSB 40.3: vertical
Project Planning Manual | Rexroth IndraControl VSB 40.3 Electric Drives
and Controls
| Bosch Rexroth AG 25/101
Dimensions, Installation and Wiring