Manual

[Checking the Supplied Accessories ]
Please check that you have recewed all of the fol)owing accessories w=th the receiver
FM wire antenna
AM loop antenna
Lilc
Remote control unit "AA" IEC LR6 batteries x 2
I How to Use This Manual !
Th=s manual is divided into two main sections
SET UP
This section explains how to make the necessary
connections from the receiver to your other audio and
wdeo components. Receiver operations described later
in this section under the heading "Preparations" enable
you to set up and custom=ze your home entertainment
center
OPERATION
Thissection providescompletereformat=onabout
operationof the recewer end suppliedremote control.
The following marks and symbols are used throughout
this manual
Provides additional Information, precautions,
and advice.
_. Indicates a bhnkmg button, rod=cater, or
display
\ I / Indicates a steadily lit button, rod=cater, or
- d=splay
/ I \
Preparing the Remote Control
Loading the batteries
AA dry cell batteries (('AA" IEC LR6)x2)
When you nobce a decrease in the operating range of
the remote control, replace all batteries w=th new ones.
When changing the batteries, rt is
recommended that you load new batteries
w=thm five minutes of removing the old
batteries If not, the preset codes may be
canceled end you will need to set them again.
Power connection
CAUTION!
Incorrect use of batteries may result in such hazards
as leakage and bursting Observe the following
precautions
• Never use new and old batteries together.
• insert the plus and minus sides of the battenes
properly according to the marks m the battery case.
• Battenes with the same shape may have d=fferent
voltages Do not use different batteries together
[SWITCHED 100 W (0.8 A) MAX] (Multi-Voltage model: 100 W MAX)
Switching this recewer on or putting _tin standby also switches components connected to the recewer's AC OUTLET
Jackson and off. When connecting components to the AC OUTLET jacks, leave the power switch of the connected
components in the ON position Total power consumption of connected components should not exceed 100W (0.8 A)
(Mutt=-Voltage model. 100 W MAX)
CAUTION]
• To avo=d malfunction, overheating, and possible fire risk, do not connect high-wattage apphances such as blow
dryers and rrons to the AC OUTLET lacks
• Do not connect a momtor or TV set
Even =fthe power consumphon of the TV or monitor =swithin the acceptable hmits, when monitors or TV sets are
sw=tched on, they consume a large amount of power and may exceed the capacity of th=s receiver
6
<ARB7157>