Manual

I Recording from Video Components I
The following operations show you how to record audio and video to the video tape recorder connected to the VCR 1 or
VCR 2 (VCR only on VSX-D5O8) jacks.
-_ he receiver's volume, balance, tone (BASS, TREBLE, and LOUDNESS), and surround effects have no effect
on the recorded signal.
1
1
2
3
SIG. SELECT 4
SIGNAL SELECT
-
1
SIGNAL SELECT
VSX-D508
[.... ' .... L
i
1
Select the component you want to record.
Be sure to press SIG. SELECT on the remote or SIGNAL SELECT on the
front panel to choose "ANALOG". (Refer to "Switching ANALOG/
DIGITAL signal input" on page 29.)
Prepare the program source.
(Loadthe DVD or LD,etc.)
Insert a blank tape into the video tape recorder (VCR 1
(VSX-D608) or VCR (VSX-D508)).
Start recording on the video tape recorder, then start
playback from the source component,
Recording cannot be made from analog to digital, and similarly
from digital to analog.
When recording a DVD, the recorded image may Ricker or be
difficult to view because of the copy protection signal
programmed on the DVD.
43
<ARB7157>