Manual

Playback 1

Turn on the power of the playback component.

___J

Press RECEIVER

to turn on the receiver. STANDBY I . (

Be sure that the standby indicator turns off on indicator I L ._-_

the front panel. _

Press FUNCTION to select the source you want to

playback.

The source you want to playback is displayed in the following order:

VSX-D6O8

VSX-DS08

T°NE -- -- vcR j

VfDEO _ TV/SAT _ DVD/LD

4 6

VSX-D608

2 3

4 6

VSX-D508

2 3

Press SIG, SELECT on the remote control or SIGNAL

SELECT on the front panel to select the input signal

corresponding to the source component,

(Refer to "Switching ANALOG/DIGITAL signal input" on page 29.)

Start playback of the component you selected in step 1.

Press VOL (+/-I to adjust the volume level in the range of

--- dB (MIN) to 0 dB (MAX).

• Depending on the channel level setting, the MAX volume level

may differ 0 to -10 dB from the level displayed.

• When this receiver is not going to be used for a long time, it is

recommended that you turn off the main power.