Reference Manual (complete instructions)

182
Technical Notes
Troubleshooting
* See “Connecting to a Smart Device (SnapBridge)” (A23) and the SnapBridge online help.
Images are not
displayed on TV.
• A computer or printer is connected to the camera. –
• The memory card contains no images. –
• Remove the memory card to play back images in the
internal memory.
10
Nikon Transfer 2
does not start
when the
camera is
connected to a
computer.
• The camera is off. –
• The battery is exhausted. 10, 11,
166
• The USB cable is not correctly connected. 102, 108
• The camera is not recognized by the computer. –
• The computer is not set to start Nikon Transfer 2
automatically. For more information about Nikon Transfer
2, refer to help information contained in ViewNX-i.
–
The PictBridge
screen is not
displayed when
the camera is
connected to a
printer.
With some PictBridge-compatible printers, the PictBridge
screen may not be displayed and it may be impossible to
print images when Auto is selected for Charge by
computer in the setup menu. Set the Charge by
computer to Off and reconnect the camera to the printer.
112, 117,
157
Images to be
printed are not
displayed.
• The memory card contains no images. –
• Remove the memory card to print images in the internal
memory.
10
Cannot select
paper size with
the camera.
The camera cannot be used to select the paper size in the
following situations, even when printing from a PictBridge-
compatible printer. Use the printer to select the paper size.
–
• The printer does not support the paper sizes specified by
the camera.
• The printer automatically selects the paper size.
Problem Cause/Solution
A