User Manual

94
| OPERATION MANUAL
FIZ SETTING CONFIGURATION VIA THE MōVI CONTROLLER
Use the MōVI Controller for complete command over your MōVI Pro’s FIZ
motor setup. Real time focus, iris, and zoom control in addition to individual
axis configuration tools provide users with a fully customizable FIZ system.
FIZ CONFIGURATIONS
These configurations can only be changed using the MōVI Controller and MōVI Pro in tandem.
FIZ Config
OPTIONS DESCRIPTION
Settings Action Select MōVI Controller setting action. This only affects
settings that are persistent and not state dependent.
Camera Type Select the camera type so the MōVI Controller can use the correct
signal protocol when communicating with the camera. This must be
done in addition to using the correct remote R/S or control cable.
Focus Scale Set the focus scale to Linear or Stretched. Stretched causes
more of the focus knob travel to be used in the longer
focal distance range where the scale gets compressed.
Focus Std/Metric Select Standard or Metric units for focus distance measurements.
Lens Unit Focus Set lens focus position to physical units or percent. A lens must
be selected on the MōVI Controller to show physical units.
Lens Unit Iris Set lens iris position to physical units or percent. A lens must
be selected on the MōVI Controller to show physical units.
Lens Unit Zoom Set lens zoom position to physical units or percent. A lens must
be selected on the MōVI Controller to show physical units.