User's Manual

Chapter 25 Bandwidth Management
ISG50 User’s Guide
407
Management screen (see Section 25.2 on page 404), and click either the Add icon or an Edit
icon.
Figure 268 Configuration > Bandwidth Management > Edit
The following table describes the labels in this screen.
Table 134 Configuration > Bandwidth Management
LABEL DESCRIPTION
Create new
Object
Use to configure any new settings objects that you need to use in this screen.
Enable Select this check box to turn on this policy.
Destination Port Use this field to specify a specific port number to which to apply this policy. Type
zero, if this policy applies for every port number.
Schedule Select a schedule that defines when the policy applies or select Create Object to
configure a new one (see Chapter 47 on page 625 for details). Otherwise, select
any to make the policy always effective.
User Select a user name or user group to which to apply the policy. Use Create new
Object if you need to configure a new user account (see Section 44.2.1 on page
602 for details). Select any to apply the policy for every user.
From Select the source zone of the traffic to which this policy applies.
To Select the destination zone of the traffic to which this policy applies.
Source Select a source address or address group for whom this policy applies. Use
Create new Object if you need to configure a new one. Select any if the policy
is effective for every source.
Destination Select a destination address or address group for whom this policy applies. Use
Create new Object if you need to configure a new one. Select any if the policy
is effective for every destination.
Protocol Select the protocol for which this condition applies. Choices are: TCP and UDP.
Select any to apply the policy to both TCP and UDP traffic.