User's Manual
Chapter 25 Bandwidth Management
ISG50 User’s Guide
405
Click Configuration > Bandwidth Management to open the following screen.
Figure 267 Configuration > Bandwidth Management
The following table describes the labels in this screen. See Section 25.2.1 on page 406 for more
information as well.
Table 133 Configuration > Bandwidth Management
LABEL DESCRIPTION
Enable BWM Select this check box to activate management bandwidth.
Enable
Highest
Bandwidth
Priority for
SIP Traffic
Select this to maximize the throughput of SIP traffic to improve SIP-based VoIP
call sound quality. This has the ISG50 immediately send SIP traffic upon
identifying it. When this option is enabled the ISG50 ignores any other bandwidth
management rules for SIP traffic (so there is no bandwidth control for SIP traffic)
and does not record SIP traffic bandwidth usage statistics.
Add Click this to create a new entry. Select an entry and click Add to create a new
entry after the selected entry.
Edit Select an entry and click this to be able to modify it.
Remove Select an entry and click this to delete it.
Activate To turn on an entry, select it and click Activate.
Inactivate To turn off an entry, select it and click Inactivate.
Move To change an entry’s position in the numbered list, select it and click Move to
display a field to type a number for where you want to put that entry and press
[ENTER] to move the entry to the number that you typed.
Status The activate (light bulb) icon is lit when the entry is active and dimmed when the
entry is inactive.
# This field is a sequential value, and it is not associated with a specific condition.
Note: The ISG50 checks conditions in the order they appear in the list. While this
sequence does not affect the functionality, you might improve the
performance of the ISG50 by putting more common conditions at the top of
the list.
Destination Port This field displays the specific port number to which this policy applies.
Schedule This is the schedule that defines when the policy applies. any means the policy
always applies.
User This is the user name or user group to which the policy applies. If any displays,
the policy applies to all users.
From This is the source zone of the traffic to which this policy applies.