Specification

VICTORY range hoods
Q1 |
21
1. If the range hood or lights do not operate after
installation:
2. The range hood vibrates when the blower is
on:
3. The blower or fan seems weak:
4. The lights work but the blower is not spinning
at all, is stuck or is rattling.
5. The hood is not venting out properly:
• Check if the range hood has been plugged in,
make sure that all power has been turned ON,
fused not
blown and all electrical wiring are
properly connected.
• Swap out light assembly to working ones to
determine whether it is caused by defective
bulbs. See Replacing the light bulbs page.
• The range hood might not have been secured
properly on to the ceiling or wall.
• Duct is too small. Range hood WILL NOT func-
tion efficiently with insufficient duct size. For
example: Connecting this hood to 4”, or 5” duct
will reduce the suction and create extra noise
and vibrations. Check if duct is clogged or if
damper unit is not installed correctly or open-
ing properly. A tight mesh on a side wall cap
unit might also cause restriction to the air flow.
• The blower might be jammed or scraping the
bottom due to shipping damage. Please con-
tact us immediately.
• Make sure the distance between the stove top
and the bottom of the hood is within* 24” and
30” in distance. *Due to dierent ceiling height
conigurations, recommended height may not
be applicable.
• Reduce the number of elbows and length of
duct work. Check if all joints are properly con-
nected, sealed, and taped.
• Make sure the power is on high speed for
heavy cooking.
NOTE: For all other inquiries, please contact TYLZA Range Hoods.
TROUBLESHOOTING
B02 |
21