Specification

RANGE HOOD OPERATIONS
A. Plus Button - used to increase settings.
B. Minus Button - used to decrease settings.
C. Timer - only works when the range hood fan is running, touch once, the timer has
a default setting of 15 minutes; use button A or B to increase or decrease time duration
depending on how much time you require.
D. To press Light to open or close the lamp. The luminance of lighting can be
adjusted from 0% to I 00% as wanted by touching Light .
E. Auto Power off- press to tum off the fan automatically after 3 minutes.
F. Power/Gesture Control—press to turn the control panel on/off; (the control panel
will power off automatically after I minute if no further operation) Press and hold for 5
seconds will run (or turn off) the gesture control. Move your hand from left to right side
will run the l st fan speed, and again to go with 2nd fan speed, then 3rd and 4th speed,
and your 5th hand moving will bring the fan into sleeping. Oppositely, move your hand
from right to left will decrease the fan speed.
Remote control：
Remote control sensor receives infrared(IR) signal from the Remote control.
The maximum distance for IR data transmission is 3 meter(10ft.) and requires direct
line of sight.The transmission distance may vary depending on temperature and remote
control battery condition.
20
| B02