Use and Care Manual

DRIVING DEPTH ADJUSTMENT DIAL

 ALWAYS disconnect air supply before Adjust-

ment dial.

1 With air pressure set, drive nails into a representative mate-

rial sample to determine if adjustment is necessary.

2 If adjustment is required, disconnect air supply.

3 Refer to the mark on the Contact Arm area for direction to

turn the Adjustment dial.

4 Reconnect air supply.

TRIGGER LOCK MECHANISM

The tool is equipped with a trigger lock mechanism. Push and rotate

the Trigger Lock Dial to the trigger free position before driving nails.

DIRECTIONAL EXHAUST COVER

 ALWAYS disconnect air supply before rotating

the exhaust cover.

Direction of the exhaust air is changeable by rotating exhaust

cover by hand.

CHANGING THE HOOK DIRECTION

Adjustment dial

WARNING

Deeper

Shallower

Deeper Shallower

Trigger

Trigger lock dial

WARNING

Hook