User Manual

26
MODEL RT2000 (X2) USER MANUAL
This section of the manual covers preventive and corrective maintenance procedures appropriate for user
personnel. The following areas are covered:
INTRODUCTION
1. REPLENISHING RECEIPT PAPER. Describes how to replace a
spent receipt paper roll.
2. CLEANING THE ENCLOSURE. The proper way to clean the ATM
housing.
3. CARD READER CLEANING. The recommended card reader
cleaning technique.
*Important*
Only qualified service personnel
are authorized to repair or ser-
vice the terminal. Should a mal-
function occur, DO NOT attempt
to service the unit yourself! Con-
tact your Triton certified service
provider!
NOTE: This operation must be completed with the AC power applied to the ATM.
1. Open the rear cabinet sleeve door.
2. If paper remains on the roll, cut or tear the paper between the roll and the printer.
3. Remove the existing paper and spindle from the paper bracket.
REPLENISHING THE RECEIPT PAPER
Cut/tear paper. Remove paper roll/spindle.