User Manual

28
MODEL RT2000 (X2) USER MANUAL
9. Feed the end of the paper into the printer take-up slot. The printer will activate and automatically feed
the paper through the printer and slightly out the front of the control panel.
10. If the printer does not feed automatically, rotate the printer assembly back up again and check the
tension lever on the printer/cutter assembly for correct (Closed) position (Step 6).
Paper feeds automatically
slightly out front of unit.
11. Go to MANAGEMENT FUNCTIONS > DIAGNOSTICS and perform a RESET/TEST PRINTER.
Feed paper into the printer take-up slot.
* NOTE *
Triton recommends the use of 20# thermal
printer paper (Triton P/N 05403-00053). This
receipt paper has been shown to improve
performance and reliability.