Quick configuration guide Access SW 4.0 1 04 to 4.1 1.00 157618 A004

14
| Quick configuration guides
5.7 CO2 control (Fan start/stop)
5.7.1 Activation
Activate the Fan start/stop function for CO2 control from the list of available functions in the Configuration > Func-
tions > Function activation menu.
Overview:
Configuration > Functions > Function activation
11 Dec 10:33
CO2 Control
Fan start/stop
function
Step by step:
1.
Select Configuration from the navigation icons
2. Select Functions
3. Select Function activation
4. Press CO2 Control
5. Select Fan start/stop function from drop down list.
5.7.2 Configuration
Select which fan speeds the unit should start/run on when CO2 control Fan start/Stop function is active in the
Configuration > Functions > CO2 Control menu.
Overview:
Configuration > Functions > CO2 control
11 Dec 10:33
Setpoint supply air fan when CO2 control Normal speed
Setpoint exhaust air fan when CO2 control Normal speed
Step by step:
1.
Select Configuration from the navigation icons
2. Select Functions
3. Select CO2 control
4. Set the desired supply air fan speed for Fan start/stop function as Setpoint supply air fan when CO2
control
5. Set the desired extract air fan speed for Fan start/stop function as Setpoint extract air when CO2
control.
157618 | A004