Installation Instructions User guide

14 FLEX I/O 8 Input HART Analog Module
Publication
1794-IN108D-EN-P - January 2014
22 Low Alarm Limit Ch3
23 High High Alarm Limit (Remote) Ch3
24 Low Low Alarm Limit (Remote) Ch3
25 High Alarm Limit Ch4
26 Low Alarm Limit Ch4
27 High High Alarm Limit (Remote) Ch4
28 Low Low Alarm Limit (Remote) Ch4
29 High Alarm Limit Ch5
30 Low Alarm Limit Ch5
31 High High Alarm Limit (Remote) Ch5
32 Low Low Alarm Limit (Remote) Ch5
33 High Alarm Limit Ch6
34 Low Alarm Limit Ch6
35 High High Alarm Limit (Remote) Ch6
36 Low Low Alarm Limit (Remote) Ch6
37 High Alarm Limit Ch7
38 Low Alarm Limit Ch7
39 High High Alarm Limit (Remote) Ch7
40 Low Low Alarm Limit (Remote) Ch7
41 HR
Ch7
HR
Ch6
HR
Ch5
HR
Ch4
HR
Ch3
HR
Ch2
HR
Ch1
HR
Ch0
HCD
Ch7
HCD
Ch6
HCD
Ch5
HCD
Ch4
HCD
Ch3
HCD
Ch2
HCD
Ch1
HCD
Ch0
Where NF: notch filter (50/60 Hz) HCD: HART CMD3 disable
FE: fault enable VR: verify replacement
HS LED: HART status LEDs HSI: HART status inhibit
HD: HART disable HHE: HART handheld enable
HR: HART rebuild
(1)
Group B and Group A “Not used in some controller software”
Configuration Map
Word Bit
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0