User Manual
Table Of Contents
- Chapter 1 Introduction
- Chapter 2 Preparations & Installation
- Chapter 3 Network Service Configurations
- Chapter 4 VoIP Telephone Adapter Configurations
- Chapter 5 Netowrk
- Chapter 6 NAT Trans
- Chapter 7 SIP Setting
- Chapter 8 Advance Setting
- Chapter 9 Other Setting
- Appendix A Voice Communication Samples
- Case 1: ATA to ATA connection via IP address
- Case 2: (Peer-to-Peer mode) VIP-157S Port 1 to Port 2 communications
- Case 3: Call Forward Feature_Example 1
- Case 4: Call Forward Feature_Example 2
- Case 5: Call Forward Feature_Example 3
- Case 6: Call Forward Feature_Example 4
- Case 7: Auto Answer Feature_IP to PSTN
- Case 8: Auto Answer Feature_PSTN to IP
- Appendix B The method of operation guide
- Appendix C VIP-156/VIP-156PE/VIP-157/VIP-157S Specifications
Routing Type
Deafult is Disable, it define the dialing route, according the [Routing
Rule] to define the dialing route is [IP or FXO].
Routing Rule
Define the outgong rule. It can also Add/ Drop profix number, if you
want to increase more then one Routing rule, you can use “+” to
except it can only press the numeric or D
D: drop
Example_5: Routing: Routing Type: FXO, Routing Rule: D007+009+0800
1. If the dialing number is “0800024365”, it will match the routing rul e [0800], then system will
automatically dial out from the [FXO].
2. If the dialing number is “00986123456”, it will match the routing rule [009], the n system will
automatically dial out from the [FXO].
3. If the dialing number is “00782280220”, it will match the routing rule [D007], then system will
decreas the [007] then dial out from the [FXO].The real dialing number is [82280220].
29BGeneral
This page defines the volume, auto answer, Caller ID, and call waiting caller ID(CID type II),
VIP-156
VIP-157
29