Digital Camera User Manual

DSD/00001/7194.5

1 DIAGNOSTIC (DPR)

2 DIAGNOSTIC (DPR)

3 DIAGNOSTIC (DPR)

4 DIAGNOSTIC (DPR)

5 MAINTENANCE (DPR)

6 MAINTENANCE (ANL)

7 MANUAL MEASURE

1: 2: 3:WARM 4: 5: 6: 7:END 8:

22. Select 5, Maintenance (DPR) and press enter ↵.

*** 5 MAINTENANCE (DPR) ***

# SELECT No.>

_____________________________________________________________

1 DATE MARK 19

2 DATE & TIME SET

3 CLEANING DRIVE

1: 2: 3: 4: 5: 6: 7: 8:

23. In the Maintenance (DPR) menu select 1, Date Mark, then press enter ↵.

24. Type 20 and press enter↵.

25. Select 2, Date & Time Set, then press enter ↵.

26. Enter the Year, Month, Date, Hour, Minute, and Second you wish within the year 2000.

Press the F4, Set, key.

The date and time you entered will be displayed in the upper right corner of the CRT.

When testing is complete, use the following steps to return to the current date.

27. From the Operation Menu select F5: DIAG then press the Yes key at the DIAG ? Yes or No

prompt.

***OPERATION MENU***

# SELECT No.>

_____________________________________________________________

1 DIAGNOSTIC (DPR)