User Manual

Insight Managed 8-Port Gigabit (Hi-Power) PoE+ Smart Cloud Switch with NETGEAR FlexPoE Power
Configuring Routing User Manual210
• If you previously added the switch to an Insight network location, enter the Insight
network password.
For more information about the local device password and the Insight network password,
see
Credentials for the local browser UI on page 28.
5. Click the Login button.
The System Information page displays.
6. Select Routing > IP > IP Configuration.
The IP Configuration page displays.
7. Select the Routing Mode Enable radio button.
8. Click the Apply button.
The following table describes the nonconfigurable information displayed on the page.
Table 46. IP Configuration information
Field Description
Default Time to Live The default value that is inserted into the Time-To-Live field of the IP header of
datagrams originated by the switch, if a
TTL value is not supplied by the transport
layer protocol. The default value is 64.
Maximum Next Hops The maximum number of hops supported by the switch. The default value is 1.
View the IP statistics
The IP Statistics page displays the IP statistics conform RFC 1213.
To display the IP statistics:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is of
f-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser
, enter the IP address of the switch.
For information about finding the IP address of the switch, see
Access the switch on
page 14.
The Local Device Login page displays.
If you did not yet register the switch with your NETGEAR account, the Register to unlock
all features page displays. For more information, see
Register and access the switch with
your NETGEAR account on page 29.