Installation Instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Guide to the appliance
- Caring for the environment
- Before using for the first time
- Settings
- Opening the settings menu
- Changing settings
- Closing the settings menu
- Language
- Time
- Water hardness
- AutoDos (AutoDos)
- Rinse aid
- Miele@home
- Remote control
- SuperVision
- Remote Update
- SmartStart
- EcoStart
- Temperature
- Display
- Volume
- Memory
- Refill indicators
- AutoOpen
- 2nd interim rinse
- BrilliantLight
- SaniWash Cycle
- System Lock
- Software version
- Legal Information
- Copyrights and licenses for operator and control software
- Copyrights and licenses for the communication module
- Showroom
- Factory default
- Caring for the environment
- Loading the dishwasher
- Detergents
- Operation
- Options
- Program overview
- Options
- Cleaning and care
- Frequently Asked Questions
- Customer Service
- Optional accessories
- Installation
- Sound emission testing
Detergents
68
Close the AutoDos lid and turn it until
the lid handle is directly below the
symbol.
If the PowerDisk is not in the correct
starting position, it will be rotated auto-
matically and the AutoDos function will
be activated.
Wait until this procedure ends before
you start a program.
The AutoDos lid must be closed to
prevent damage to the AutoDos.
Always close the AutoDos lid before
you close the dishwasher door. Oth-
erwise, the AutoDos may become
damaged.
Programs cannot start when the Auto-
Dos lid is open.
The detergent powder must be dry
so that it does not clump together.
Do not fill the AutoDos with any type
of fluid.
In order to ensure that the AutoDos
works at its best, check it each time
you replace the PowerDisk and clean
it if needed (see “Cleaning the Auto-
Dos” under “Cleaning and care”).