Installation Instructions

Settings
46
AutoOpen
In some programs the door automati-
cally opens slightly to assist the drying
process.
This function can be deactivated if you
wish.
 Risk of damage due to steam.
Steam from the dishwasher could
damage the edges of delicate coun-
tertops when you open the door at
the end of the program if the blower
is no longer running.
If you have deactivated the auto-
matic door opening function but
would still like to open the door at
the end of the program, then make
sure that you open the door fully.
2nd interim rinse
You can choose this function to in-
crease the cleaning performance of the
programs with a second interim rinse.
When this function is activated, water
consumption may increase.
If this function is switched on, it will be
applied to all programs until it is
switched off again.
BrilliantLight
This dishwasher is equipped with inte-
rior lighting.
When the door is open, the lighting
turns off automatically after 15minutes.
You can also turn off the interior lighting
permanently.
SaniWash Cycle
If you mainly use low-temperature pro-
grams , there is a risk of bacteria and
unpleasant odors building up in the
wash cabinet (see “Hygiene cycle” un-
der “Cleaning and care”).
If this function is switched on, a mes-
sage will be displayed recommending
the use of a high-temperature program
after several low-temperature programs
have been run.