User Manual

Set Lists
128
Selecting and playing sounds
Set List Play page
Selecting Set Lists
The large name in the Set List display is the name of the
current Slot, so that you can easily see the sound that you’re
playing. The Set List name is in smaller text at the top left-
hand corner of the screen.
Selecting with the front-panel buttons
You can select Set Lists using the front-panel buttons,
without touching the screen. To do so:
1. Press the SET LIST button to enter Set List mode.
2. Press the Play tab to go to the Set List P0: Play page.
The main Play page shows the Slot buttons, the comments
for the current Slot, and an overview of the EQ.
3. Touch the Set List name to select it.
The Set List name will become highlighted.
4. Use the VALUE controllers to select the desired Set
List.
You can do any of the following:
• Turn the Value dial.
• Press the Inc or Dec buttons.
• Use the numeric keypad [0]–[9] to specify the number,
and press the ENTER key.
The VALUE slider is reserved for modulation, and sends
CC#18 when the Slot contains a Program or Combination.
Once you’ve selected a Set List, you can select Slots within
the list. For more information, see “Selecting Slots,” below.
Selecting via the touch-screen
You can select Set Lists from an on-screen list, as well.
1. Press the Set List popup button (to the left of the Set
List name).
The Set List Select dialog appears.
2. Press one of the names in the list to select a Set List.
The selected Set List will be highlighted, and the keyboard
will immediately switch to the first Slot in the Set List.
3. If you like, play a few notes to hear the sound of the
first Slot in the Set List.
4. When you are satisfied with the selected Set List, press
the OK button to close the popup menu.
Alternately, you can press the Cancel button to return to the
previously selected Set List.
Set List Name
Selected Slot
Previous
button
Next button
Comment
Area
Slot Name
Slot Comments
Transpose
value