Owners manual

Hardware options installation 136
4.
Install the FSBBU module into the power supply bay until it clicks into place.
5. Connect multiple FSBBU units using a daisy chain configuration. A jumper cable (part number
K9B28A) is required for a daisy chain configuration.
6. Charge the FSBBU module until the LED is solid green.
For more information about product features, specifications, options, configurations, and compatibility,
see the product QuickSpecs on the Hewlett Packard Enterprise website (http://www.hpe.com/info/qs).
HP Trusted Platform Module option
This server supports both TPM 1.2 and TPM 2.0. However, once the TPM version 1.2 is installed on the
system board, it can no longer be upgraded to TPM version 2.0.
For more information about product features, specifications, options, configurations, and compatibility,
see the product QuickSpecs on the Hewlett Packard Enterprise website (http://www.hpe.com/info/qs).
Use these instructions to install and enable a TPM on a supported server. This procedure includes three
sections:
1. Installing the Trusted Platform Module board (on page 137).
2. Retaining the recovery key/password (on page 138).
3. Enabling the Trusted Platform Module (on page 139).
Enabling the TPM requires accessing BIOS/Platform Configuration (RBSU) in the UEFI System
Utilities (on page 178).