User Manual

The front LEDs blink green and the aircraft status indicators blinks red and green alternately after
the motor starts.
Return to Home
The Return to Home (RTH) function brings the aircraft back to the last recorded Home Point when
the GNSS is signal is strong. There are three types of RTH: Smart RTH, Low Battery RTH, and Failsafe
RTH. This section describes these three types of RTH in detail. If the video link signal is lost during
flight while the remote controller is still able to control the movements of the aircraft, there will
be a prompt to initiate RTH. RTH can be cancelled.
GNSS
Description
Home
Point
The default Home point is the first location where the aircraft received a
strong or moderately strong GNSS signal (where the icon shows white).
Home point will be updated when the aircraft received a strong or
moderately strong GNSS signal and it cannot be updated if the GNSS signal
is weak before takeoff.
Smart RTH
If the GNSS signal is sufficient, Smart RTH can be used to bring the aircraft back to the Home Point.
Smart RTH is initiated either by tapping in DJI Fly or by pressing and holding the RTH button