User's Manual

2-7

Installing an ANIM

5. Press straight down Þrmly on the ANIM until the pins slide all the way into

the motherboard connector. Ensure that the ANIM seats ßush on the

standoffs.

6. Secure the ANIM with the two screws saved in step 2 and the two screws

supplied with each ANIM.

7. If there is more than one ANIM to install, repeat steps 2 through 6 to install

each one.

Figure 2-5. Installing an ANIM

CAUTION

When installing or removing an ANIM make sure to always use the cutouts on the

board to handle the ANIM. See Figure 2-6 for the location of the cutouts.

When connecting the ANIM pins to the motherboard connector take extra

precaution that the pins do not enter the connector at an angle as this will

damage both the ANIM and the motherboard connector.

Standoffs

Standoff

Motherboard

Module

Connector

Module

Motherboard

Connector

Cutout