User's Manual
Table Of Contents
- 1 Welcome
- 2 Quick Start
- 3 MIDI Setup Guide
- 4 Program Interface
- 5 MIDI Translator Concepts
- 6 The Project
- 7 The Preset
- 8 The Translator Entry
- 9 Actions
- 9.1 MIDI
- 9.2 Keystrokes
- 9.3 Timer
- 9.4 Preset Change
- 9.5 Disable/Enable Processing Actions
- 9.6 Mouse (Outgoing)
- 9.7 Execute File (Outgoing)
- 9.8 Serial Port
- 9.9 AppleScript
- 10 Rules and Variables
- 11 Settings
- 12 Behind the Scenes
- 13 Tips & Tricks
- 14 Usage Example
- 15 MIDI Translator in Hardware: the BomeBox
- 16 Reference
Bome MIDI Translator: User's Manual 4 Program Interface
If the properties panel is visible, selecting a Translator will show its
properties in the properties panel. You can double-click a translator or press
ENTER to activate the translator properties.
4.7 Properties Pane
When activated, the properties pane takes the entire right side. It displays
editors for the currently selected project, preset, or translator.
To invoke the properties pane, press ENTER in either the project, preset list,
or translator list, or double click an item in the lists, or press the properties
toolbar button: . You can also quickly view and activate the project
properties by pressing Ctrl+3, or select a preset and jump to its properties
by pressing Ctrl+4. For editing the translator properties, use these
shortcuts: General Ctrl+5, Incoming Ctrl+6, Rules Ctrl+7, Outgoing Ctrl+8.
Last, but not least, the project default MIDI ports are shown and selected
when you invoke the MIDI toolbar button .
4.8 Event Monitor
When active, the lower left activity area shows the event monitor, where
you can quickly see what internal and external signals Bome MIDI Translator
is processing. The virtual LEDs will flash when the noted action is being
performed, or the noted signal is being received or transmitted.
Event Monitor
You can activate the event monitor in the View menu, or with the toolbar
button.
(c) 2019 by Bome Software GmbH & Co. KG page 20