User's Manual

Table Of Contents

Bome MIDI Translator: User's Manual 2 Quick Start

To create a MIDI route, click and drag a MIDI IN connection on the left side

of the screen to the desired MIDI OUT connection to enable a MIDI thru

connection between the ports. Any data NOT particularly processed by your

preset will be routed directly to the designated output port.

2.5 Add a first Translator Entry

You now should have the MIDI interface settings properly configured. Test

that they're working correctly by moving a controller on your MIDI device

and checking to see if the corresponding light illuminates on the Event

Monitor, located at the bottom left.

Now you may begin adding translators. Click the T+ (Add Translator) button

on the toolbar to add a new blank translator. Name your translator and

press the Enter key. You can now begin working with the translator. If the

right translator properties are not visible, double click the translator object

to enter the Translator Edit screen.

2.6 Defining Translators

Once you've added your first Translator entry, open the right properties

pane by double-clicking it, or by pressing the properties tool button.

Add Translator