User's Manual
Table Of Contents
- Copyright
- Disclaimer
- Introduction
- Installation
- Waking up the transmitter and the receiver
- Basic operations and on-screen display (OSD)
- Troubleshooting
- Supported resolution
- Audio bit rate support
- Product specification
14 Installation
Placing the receiver on the provided stand
Connecting the HDMI cable and power
Once the receiver has been positioned properly near the projector, connect the HDMI cable and
power to ensure signal transmission.
To supply power to the receiver, do one of the following.
• Some of the projector models may be equipped with a USB type A jack (1.5V) to provide power
supply for the receiver. See Power supply via a USB type A jack (1.5V) on page 15 for details.
• For projector models without a USB type A jack (1.5V) for power supply, see Power supply via a
power adapter on page 15 for details.
Connecting the HDMI cable
Connect the HDMI cable to the HDMI out jack of the receiver and the HDMI input jack of the
projector.
If your projector is placed on a table, simply put the
receiver on the provided stand as illustrated.
HDMI