Technical data

34
Adjusting water intake
Press Drying/Menu (S4) for setting the water
intake.
Machines manufactured before year 2005
week 16
Press Drying/Menu (S4) to access water intake
setting
Press Temperature/Set (S3) to adjust the water
intake.
Display 0: Normal water intake volume
Display –15 %: Water intake volume is reduced
by 15 %
Display –10 %: Water intake volume is reduced
by 10 %
Display –5 %: Water intake volume is reduced by
5 %
Display Time: Time-controlled water intake
Display +5 %: Water intake volume is increased
by 5 %
Display +10 %: Water intake volume is increased
by 10 %
Display +15 %: Water intake volume is increased
by 15 %
Press Start (S2) to store the setting of the water
intake volume and LCD contrast.
The programme returns to the main menu.
Machines manufactured year 2005 week 16
and later
Press Drying/Menu (S4) to access water intake
setting
Press Temperature/Set (S3) to adjust the water
intake.
Display 0: Normal water intake volume
Display +5%: Water intake volume is increased
by 5%
Display +10 %: Water intake volume is increased
by 10 %
Display +5%: Water intake volume is increased
by 15 %
Display time: Time-controlled water intake
Display Time +5 %: Water intake volume is
increased by 5 %
Display Time +10 %: Water intake volume is
increased by 10 %
Display Time +15 %: Water intake volume is
increased by 15 %
Press Drying/Menu (S4) to access LCD
contrast setting.
Press Temperature/Set (S3 repeatedly) to adjust
the contrast 0, +1, +2, +3, -1, -2, -3.
Press Start (S2) to store the setting of the water
intake volume and LCD contrast.
The programme returns to the main menu.
°C Display °C Display
0 32 40 111
5 40 45 123
10 49 50 134
15 60 55 146
20 71 60 156
25 80 65 167
30 90 70 177
35 101 75 188
The table shows the temperature and equivalent
display code
DW20.5
1. Turn off the main switch (1/0).
2. Wait for at least 5 seconds
3. Keep Program- / Startbutton (S1&S2)
depressed.
4. Turn on the main switch (1/0).
5. Release Program- and Startbutton
(S1&S2) when the diods lights.
Proceed with point 6 within 5 seconds
6. Press Start (S2) 3 times in a rapid
succession.
( 1 or 2 flashes in the display)
7. Select desired variant with Program button
(S1)
Confirm selection by pressing Start (S2). The
program returns to the main menu.