Technical data

29
If you wish access to the variant setting again:
Fill the machine with appr. 1 litre of water!
1. Turn off the main switch (I/0)
2. Wait for at least 5 seconds
3. Keep the Programme/Start buttons
(S1&S2) depressed
4. Turn on the main switch (I/0)
5. Release the Programme/Start buttons
(S1&S2) at once! It takes a few seconds
for the machine to read off that S1&S2 are
depressed.
6. Press Start (S2) three times in a rapid
succession. Indication 1 or 2 flashes in the
display.
7. Select variant with S1
Confirm your choice by pressing Start (S2).
The programme returns to the main menu.
Water hardness setting
Activation of setting menu:
1. Turn off the main switch (I/0)
2. Wait for at least 5 seconds
3. Keep the Startbutton (S2)depressed
4. Turn on the main switch (I/0)
5. Release the Startbutton (S2)
6. Select desired water hardness with
the Programme button (S1),
see table below!
Setting: Water hardness [°dH]
Display shows: 0 0-5 (incl. machines without
water softener)
Display shows: 1 6-8
Display shows: 2 9-11
Display shows: 3 12-14
Display shows: 4 15-19
Display shows: 5 20-24
Display shows: 6 25-29
Display shows: 7 30-39
Display shows: 8 40-49
Display shows: 9 50+
Confirm your choice by pressing Start (S2).
The programme returns to the main menu.
Total reset
To reset the machine to its basic settings.
1. Turn off the main switch (I/0)
2. Wait for at least 5 seconds
3. Keep the Programme button
depressed (S1)
4. Turn on the main switch (I/0)
5. Release the Programme button (S1)
The machine will reset various settings, although
not water hardness and intake volume. The
machine also senses presence of the heavy soil
and pressure sensor and spray arm diverter. The
machine then automatically returns to the main
menu.