Technical data

21
SETTINGSSETTINGS
SETTINGSSETTINGS
SETTINGS
DW20.1
Panel type DW20.1, L = LED, S =Push-button
Temperature selection S3
L6 lights when High temperature is selected
Drying selection S4
Long and Normal drying (Quick wash: Long and
No drying).
(L5 lights when long/extra drying is selected)
Variant setting
If the control unit is replaced, the machine will
automatically be in the variant setting menu when
the power supply is switched on for the first time.
L1 flash: Variant A see above, with no and two
options (temp, drying).
L4 flash: Variant B see above, with one option
(temp).
1. Press the programme button (S1) repeatedly
until L1 or L4 is flashing.
2. Confirm your choice by pressing Start (S2).
(The programme then reverts automatically
the main menu.)
If you wish to access the variant setting menu again:
1. Turn off the main switch (I/0)
2. Wait for at least five seconds
3. Keep the Programme and Start button
depressed (S1&S2)
4. Turn on the main switch (I/0)
5. Release the Programme and Start button
(S1&S2). Proceed with point 6 within 5
sec!
6. Press Start (S2) three times in a rapid
succession. Select variant with programme
button (S1).
Confirm your choice by pressing Start (S2).
The programme returns to the main menu.
Water hardness setting
Activation of setting menu
1. Turn off the main switch (I/0)
2. Wait for at least five seconds
3. Keep the Start button (S2) depressed
4. Turn on the main switch (I/0)
5. Release the Start button (S2) L7 starts to
flash
6. Select desired water hardness with the
Programme button (S1)
Setting: Water hardness
[°dH]
(German degrees of hardness)
All LEDs are 0-5 (incl. machines
extinguished without water softener)
L1 lit 6-8
L1-2 lit 9-14
L1-3 lit 15-19
L1-4 20-29
L1-5 +L11 lit 30-44
L1-6 +L-11 +L-12 lit 45+
Confirm your choice by pressing Start (S2).
The programme returns to the main menu.
Total reset
To reset the machine to its basic settings.
1. Turn off the main switch (I/0)
2. Wait for at least 5 seconds
3. Keep the Programme button (S1) depressed
4. Turn on the main switch (I/0)
5. Release the Programme button (S1).
The machine now resets various settings, but not
the water hardness and water intake setting. The
machine then reverts automatically to the main
menu.
PROGRAM
L6
L1
L2
L3
L4
L5
L11
L12
L7
START
STOP
S1
S3
S2
S4
L8
L9
L10
L1
L2
L3
L4
L12
L7
L11
PROGRAM
START
STOP
S1
S2
PROGRAM
L6
L1
L2
L3
L4
L5
L11
L12
L7
START
STOP
S1
S2
L8
L9
L10
S4
Variant A
Variant AVariant B