Technical data

27
e) Temperature display in °C/°F.
f) Machine information. Water
consumption for most recent programmes
run, number of programmes run. Toggle
with S3.
Confirm your choice by pressing Start (S2).
The programme returns to the main menu.
Demo mode
Enter by pressing S4 and then turn the power
On or both at the same time
Scrolling arguments will appear :
“Turbo Drying ...Super Cleaning
System...Auto Wash...Flexi Racks...Power
Zone...8 Steel......Turbo Drying...
Exit by turning main switch Off.
Variant setting
If the control unit is replaced, the machine will
automatically be in the variant setting menu when
the power supply is switched on for the first time.
Fill the machine with appr. 1 litre of water!
1. Press the Programme button (S1, repeatedly
until the desired variant is selected):
Variant 1: Variant with Menu/Set
Variant 2: Variant with Temperature /
Drying selection.
2. Confirm your choice by pressing Start (S2),
or Drying selection/Menu S4). (The
machine senses the presence of the
turbidity, pressure and humidity sensors and
the spray arm divider. The programme
reverts to the main menu.)
If you wish to access the variant setting menu
again:
1. Turn off the main switch (I/0).
2. Wait for at least 5 seconds
3. Keep Programme and Start depressed. (S1
/ S2)
4. Turn on the main switch (I/0).
5. Release Programme and Start buttons (S1 /
S2) at once! Proceed with point 6 within 5
sec!
SETTINGSSETTINGS
SETTINGSSETTINGS
SETTINGS
6. Press Start (S2) 3 times in a rapid succes-
sion
7. Press the Programme button (S1)
repeatedly until desired variant is selected.
Confirm your choice by pressing Start (S2).
The programme returns to the main menu.
Total reset
To reset the machine to its basic settings.
Fill the machine with appr. 1 litre of water!
1. Turn off the main switch (I/0)
2. Wait for at least 5 seconds
3. Keep the Programme button depressed (S1)
4. Turn on the main switch (I/0)
5. Release the Programme button (S1).
The machine now resets various settings,
although not the water hardness and intake
volume, and senses the presence of the turbidity,
pressure and humidity sensors and the spray arm
divider. The machine then reverts automatically
to the main menu.