User's Manual

Chapter 53 Log and Report
ISG50 User’s Guide
707
The following table describes the labels in this screen.
53.3 Log Setting Screens
The Log Setting screens control log messages and alerts. A log message stores the information for
viewing (for example, in the View Log tab) or regular e-mailing later, and an alert is e-mailed
immediately. Usually, alerts are used for events that require more serious attention, such as system
errors and attacks.
The ISG50 provides a system log and supports e-mail profiles and remote syslog servers. The
system log is available on the View Log tab, the e-mail profiles are used to mail log messages to
the specified destinations, and the other four logs are stored on specified syslog servers.
The Log Setting tab also controls what information is saved in each log. For the system log, you
can also specify which log messages are e-mailed, where they are e-mailed, and how often they are
e-mailed.
For alerts, the Log Settings tab controls which events generate alerts and where alerts are e-
mailed.
The Log Settings Summary screen provides a summary of all the settings. You can use the Log
Settings Edit screen to maintain the detailed settings (such as log categories, e-mail addresses,
Table 283 Configuration > Log & Report > Email Daily Report
LABEL DESCRIPTION
Enable Email
Daily Report
Select this to send reports by e-mail every day.
Mail Server Type the name or IP address of the outgoing SMTP server.
Mail Subject Type the subject line for the outgoing e-mail. Select Append system name to add the
ISG50’s system name to the subject. Select Append date time to add the ISG50’s system
date and time to the subject.
Mail From Type the e-mail address from which the outgoing e-mail is delivered. This address is used in
replies.
Mail To Type the e-mail address (or addresses) to which the outgoing e-mail is delivered.
SMTP
Authentication
Select this check box if it is necessary to provide a user name and password to the SMTP
server.
User Name This box is effective when you select the SMTP Authentication check box. Type the user
name to provide to the SMTP server when the log is e-mailed.
Password This box is effective when you select the SMTP Authentication check box. Type the
password to provide to the SMTP server when the log is e-mailed.
Send Report
Now
Click this button to have the ISG50 send the daily e-mail report immediately.
Time for
sending report
Select the time of day (hours and minutes) when the log is e-mailed. Use 24-hour notation.
Report Items Select the information to include in the report. Select Reset counters after sending
report successfully if you only want to see statistics for a 24 hour period.
Reset All
Counters
Click this to discard all report data and start all of the counters over at zero.
Apply Click Apply to save your changes back to the ISG50.
Reset Click Reset to return the screen to its last-saved settings.